RsPoints2SurfOption

RESURF - solution to nurb surface fittingr Computer Aided Design (CAD)

Home | Products | Purchase | Change log & Road map | Gallery | Support | Download | Contact | 中文

Home > Documentation for RhinoResurf

Table of Contents

1. Introduction

Download and Install RhinoResurf for Rhino 4 (32-bit) and Rhino 5/6(64-bit)

Loading RhinoResurf into Rhino 4.0 (32-bit) and 5/6/7(64-bit)

License Agreement

2. Command Reference

Command Reference

RsPoints2Surf

RsPoints2SurfOption

RsMesh2Surf

RsMesh2StarFace

RsCurves2Surf

RsMesh2Surfs

RsMesh2SurfsByPolygon

RsFillHoleBySurf

RsSurfaceMatch

RsSurfacemapDlg

RsAutoNurbs

RsPointCloud2Mesh

RsSplitCurveNetwork

RsSplitPointCloud

RsSymmetricPlane

RsMergeMeshs

RsFillMeshholes

RsFaceFromLines

RsFaceFromPolygon

RsMeshBdryCurves

RsrSurfaceFlatten

RsrMeshFlatten

RsRegister(purchase)

Tutorials

Tutorial 1 - Convert a mesh to a surface

Tutorial 2 - Convert a surface from a sub-mesh

Tutorial 3 - Drape a surface over a point cloud

Tutorial 4 - Convert a mesh to multiple surfaces with quad face

Tutorial 5 - Use Fix button to smooth the wavy surface in _RsMesh2Surfs

Tutorial 6 - Convert a mesh to multiple surfaces with trimmed surface

Tutorial 7 - Automatic surfaces (solid) generation from mesh

Tutorial 8 - Single surface from curves

Tutorial 9 - Point cloud to mesh

Tutorial 10 - 6 Steps to create a solid from mesh by using RhinoResurf

Tutorial 11 - Fit mesh to NURBS surface by specifying shape type. ( Command: _RsMesh2Surf in RhinoResurf for Rhino 4 or 5)

Tutorial 12 -morph the geometry from original mesh data to compensated mesh data by using command _RsSurfacemap

Tutorial 13 -Point cloud to trimmed surfaceorph the geometry from original mesh data to compensated mesh data by using command _RsSurfacemap

Tutorial 14 -Create multiple surfaces by using command 'CreateQuadMesh' and '_RsMesh2SurfsByPolygon' in Rhino 6 (SR10 or greater)

Tutorial 15 -Fill hole with surface on G1 continuity with neighbor patches

Tutorial 16 -Unfold 3D mesh into 2D mesh

Tutorial 17 - Method for quickly converting cylindrical topology mesh surface into smooth NURBS surface

FAQ 1 - Why RhinoResurf register dialog does not display in my Rhino

RsPoints2SurfOption

Menu Button	RhinoResurf > Single surface from points > Command option
Command Name	RsPoints2SurfOption

Command description:

This command let user drape a single surface over a point cloud by running command. User can develop their own Plugin by adding this command in their RhinoScript code.

Video:

This video shows how to run the command:

If the above video is invalid, please click here to download the video

Parameter description:

U_Control: surface control point number in U-direction.

V_Control: surface control point number in V-direction.

U_Degree: surface degree number in U-direction.

V_Degree: surface degree number in V-direction.

U_Extend: length for surface extending in U-direction.

V_Extend: length for surface extending in V-direction.

MaxTol: tolerance threshold for the deviation between point and surface.

Smoothness: factor to control the surface smoothness.

Computation: iteration number to compute for surface fitting when user cilck 'Fit' .

Specify_orientation: to specify pull orientation ( see the red arrow in the above picture) or not. When it is 0, program will compute the pull orientation automatically; When it is 1 , use the pull orientaion and u-direction (see the green arrow in the above picture)specified by user.

When user set Specify_orientation as 1 , user will see the followings parameters:

( norm_dx, norm_dy, norm_dz): pull orientation vector.

( u_dx, u_dy, u_dz): U-direction vector.

Tutorial:

Draping a surface over a point cloud.

Order RhinoResurf...

Copyright (C) 2007-2020 RESURF All Rights Reserved. Privacy Statement